11
Power-on
indicator
green on Server is switched on and running.
orange on
Server is switched off, but mains voltage
is present (standby mode).
I After connecting the server to the
mains, it will take about 60
seconds until the server will
switch into standby mode.
With firmware version 7.3.x, two new operating
conditions are indicated: iRMC booting and power-on
delay.
yellow /
orange
flashing
iRMC booting
I After connecting the server to the
mains (power cord plugged in /
after mains failure) the iRMC will
boot. The system cannot be
switched on, until the iRMC boot
sequence is complete. During
this time, the power-on indicator
will flash yellow / orange.
yellow on
Power-on delay
I After shutting down, the server
cannot be switched on again right
away. If the On / Off button is
pressed right after shutting down
the server, the power-on indicator
will light up yellow until the delay
period ends and the server will
boot.
Pos. Indicator Status Description
To Next Page
Loading...
Need help?
General