Fujitsu PRIMERGY TX300 S8 User Manual

TX300 S8 / RX350 S8 Upgrade and Maintenance Manual 89
Basic hardware procedures
Figure 36: Mounting the system board carrier (B)
Ê Slide the system board carrier towards the server rear until the latch on the
carrier properly engages in the slot on the rear server floor.
V CAUTION!
Ensure not to trap or pinch any cables running through the cable exit
from the power backplane.

Fujitsu PRIMERGY TX300 S8 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX300 S8
Category	Server
Language	English