15. OTHER FUNCTIONS
15-6
[INSTRUMENTS SETUP] section
[Engine & Tank Manual Setup]:
[Graphic Instruments Setup]:
[Graphic Instruments Setup] - [Maximum Boat Speed], [Maximum Wind Speed]
[Graphic Instruments Setup] - [DEPTH]
[Graphic Instruments Setup] - [SEA SURFACE TEMPERATURE]
Menu item Description
[Engine &
Tank
Automatic
Setup]
The system will automatically detect engines and tanks connected to the
same network.
[Engine &
Tank
Manual
Setup]
If the system does not automatically detect engines and tanks, set the en-
gines and tanks manually. See "Engine & Tank Manual Setup" below.
[Graphic Instruments
Setup]
• See "Graphic Instruments Setup" below.
• [Reset Instrument Pages]: Restore all instrument pages.
• [Reset Default Settings]: Restore default settings for the [Graphic Instru-
ments Setup] menu.
Menu Item Description Options (setting range)
[Nickname] Change the nickname for the engine or tank.
[Used For Propulsion] Select which engine/tank is used to calcu-
late the distance which may be traveled us-
ing the remaining fuel. [ON] uses the
engine/tank for calculations, [OFF] ignores
the engine/tank.
[OFF], [ON]
[Reset] Resets the engine/tank details to default.
Menu Item Description Options (setting range)
[Maximum Boat Speed] Set the transducer’s maximum detectable
speed.
1 to 99 kn
[Maximum Wind Speed] Set the transducer’s maximum detectable
speed.
1 to 99 kn
Menu Item Description Options (setting range)
[Minimum Depth] Set the transducer’s minimum detectable
depth.
0 to 6,558 ft
[Maximum Depth] Set the transducer’s maximum detectable
depth.
4 to 6,560 ft
Menu Item Description Options (setting range)
[Minimum Sea Surface
Temperature]
Set the transducer’s minimum detectable
temperature.
32.00 to 89.97°F
[Maximum Sea Surface
Temperature]
Set the transducer’s maximum detectable
temperature.
33.01 to 210.00°F
To Next Page
Loading...
Need help?
General