GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 3 - System Setup 3 - 79
3-9-17-2 Query/Retrieve Setup on the Vivid 7 with Software v7.x/v6.x/v5.x/v4.x (cont’d)
In Figure 3-78, the selected dataflow, Query/Retrieve, is shown.
5.) Select QueryRetrieve so it is highlighted and then select Properties to display the Properties dialog.
Figure 3-78 Query/Retrieve workflow
Figure 3-79 Select Query/Retrieve’s Properties
SELECT
QUERY RETRIEVE
AND THEN SELECT
PROPERTIES
QUERY RETRIEVE
PROPERTIES DIALOG
To Next Page
