GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
3 - 120 Section 3-11 - Connectivity Setup - Software v2.x
3-11-8 Verification of a Connection Set Up to EchoPAC PC - Software v2.x (cont’d)
12.)Verify that the IP-address is correct, indicating that you have selected the right unit.
If the IP number is wrong, it means that you are addressing the wrong device (computer).
Correct the address and do a new verification before you continue.
Figure 3-131 Verify/change IP address to selected device.
IP address for selected
device
To Next Page
Loading...
