GE Vivid 7 - Page 851

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
- Index - 3
Export Configuration 3-70
External Peripherals 3-37
Description 5-123
F
Facility Needs 2-10
Fan 9-26
FAQ
Frequently Asked Questions 7-3
Features
Desirable 2-12
FEP - Front-End Processor 5-6
Filter
Replacement Procedure 8-8
Filter Cover
Replacement Procedure 8-6
Foot Pedal 9-68
Footswitch 9-68
Connection 3-19
Forced Shut Down 8-32, 8-50, 8-74
Format a CD-R disc 4-17
Format an MO Disk 4-17
Formatting a Removable Media 4-17
Formatting Removable Media, SW v3.x and above 4-17
Frequently Asked Questions 7-3
Front Bumper
Replacement Procedure 8-100
Front Casters Replacement Procedure 8-95
Front Cover Replacement Procedure 8-7
Front Wheels Replacement Procedure 8-95
Front-End
- Alignment 6-6
- Alignment, when to do 6-6
- Controller Board, FEC-2 5-37
- Description 5-6
- FE Modules Parts List 9-41, 9-45
- Processor 5-6
- Subsystem 5-9
Front-End Alignment -- see DC Offset Calibration 7-34
Front-End Processor Card Cage 9-38
Front-End Processor Version 2
FRU Parts 9-40
Functional Checks 4-1, 4-28
2D Mode (B mode) Checks 4-32
Backend Processor Checks 4-73
Basic Controls 4-29
Cineloop Check 4-69
Color Mode Checks 4-43
Contrast Checks 4-63
Doppler Mode Checks 4-49
ECG Check 4-68
M Mode Checks 4-39
Measurements and Multi Image Checks 4-64
Multi Image Checks 4-66
Performance Tests 4-31
Probe/Connectors Check 4-67
Stress Echo 4-63
Tissue Velocity Imaging (TVI) Checks 4-57
G
Gas Spring 9-25
General Cleaning 10-9
General Procedures 4-2
Global Service User Interface (GSUI) 5-153
Going Offline 3-132
H
Hardware/Software Compatibility 9-7
Hardware/Software Versions 1-8, 9-38
Front-End Processor Version 1 9-42
Front-End Processor Version 2 (FEP2) 9-38
Hazard Icons 1-10
Heat Dissipation 2-2
Height 3-14
Hospital and Department Name 3-28
Hospital Network Connection
- to EchoPAC PC Workstation 3-135
How often should maintenance tasks be performed? 10-3
HP Deskjet 990 Cxi Network Printer 3-37
Human Safety 1-16
Humidity 2-2
I
ideo Cassette Recorders 9-67
iLinq 5-152
Image Port
IMP2 Board 5-56
Input / Output Modules 9-62
Input Power 10-8
Inrush Current 2-6
Install CD-R Disc 4-16
Install MO Disk 4-14
Installation 3-1, 3-136
Paperwork 3-136
Warnings 3-2
Installation Reminders 3-2
Installation Warnings 3-2
Internal I/O 5-103
Internal Peripherals 3-36
Internal Storage Devices 5-95
Introduction to this manual 1-1
K