Gemalto Cinterion EHS6 - Page 195

Cinterion
®
EHS6 AT Command Set 
8.14 AT^SNMON
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 195 of 513

Parameter Description
This parameter determines the action to be taken for the monitoring command.
0 Reset values
1Set values
2 Query values
0 Value returned in "INS" and "NBC" scan output. Value has no meaning and can
be ignored.
0
(D)
...6 Define number of neighbor cells to be scanned with "NBC" feature.
Network Color Code
Base Station Color Code
Write Command
Configure neighbor cell scan output (<action>=1).
AT^SNMON="NBC/CFG/3GPP", <action>, <ratNBC>, <cellNo>
Response(s)
^SNMON: "NBC/CFG/3GPP", 2G, <cellNo>
^SNMON: "NBC/CFG/3GPP", 3G, <cellNo>
OK
ERROR
+CME ERROR: <err>
Write Command
Query configuration of neighbor cell scan output (<action>=2), or reset default configuration (<action>= 0).
AT^SNMON="NBC/CFG/3GPP", <action>
Response(s)
If <action>= 2 to query configuration:
^SNMON: "NBC/CFG/3GPP", 2G, <cellNo>
^SNMON: "NBC/CFG/3GPP", 3G, <cellNo>
If <action>= 0 <cellNo> will be reset to 0:
^SNMON: "NBC/CFG/3GPP", 2G, 0
^SNMON: "NBC/CFG/3GPP", 3G, 0
OK
ERROR
+CME ERROR: <err>
PIN  Last Reference(s)
- - - 3GPP TS 45.008 [50]
<action>
(num)
<reserved>
(num)
<cellNo>
(num)(NV)
<ncc>
(num)
<bcc>
(num)