Cinterion
®
EHS6 AT Command Set
8.14 AT^SNMON
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 196 of 513
Mobile Country Code (first part of the PLMN code).
Mobile Network Code (second part of the PLMN code)
Carrier to noise ratio in dB = measured Ec/Io value in dB. Please refer to 3GPP 25.133, section 9.1.2.3, Table
9.9 for details on the mapping from EC/n0 to EC/Io.
Radio Band
In the response of the read command this parameter indicates the radio band of the cell that was scanned.
1GSM 900
2 GSM 1800
4GSM 850
8 GSM 1900
16 WCDMA 2100 (BC1)
32 WCDMA 1900 (BC2)
64 WCDMA 850 (BC5)
128 WCDMA 900 (BC8)
256 WCDMA 800 (BC6)
Radio Access Technology for subcommand INS
0GSM
2UTRAN
Radio Access Technology for NBC subcommands
“ALL“ All radio access technologies supported by ME
“3G“ UTRAN
“2G“ GSM
PLMN code
Signal Strength in dBm
GPRS availibility
0 GPRS not available
1 GPRS available
<mcc>
(num)
<mnc>
(num)
<ec/n0>
(num)
<rb>
(num)
<ratINS>
(num)
<ratNBC>
(str)(NV)
<plmn>
(str)
<dbm>
(str)
<gprs_avail>
(num)
To Next Page
Loading...
Need help?
General
