Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
10.12 AT^SISX
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 260 of 513
The IP address of the host (i.e. "192.168.1.3").
[1]...30 Number of "Ping" ICMP Echo Requests to be sent.
200...[5000]...10000 Amount of time, in milliseconds, to wait for an ICMP Echo Response message
related to a previously sent Echo Request message.
Indicate the type and format of the information given in the command responses (see syntax of the AT^SISX
write command above).
1 Ping status received for the ICMP Echo Request(s). Depending on parameter
<request> 1 - 30 rows. Address and Round Trip Time are returned for each
request.
2 one row packet statistic calculated from the ping response(s) received for
<pingInfoType>=1.
3 one row time statistics calculated from the ping response(s) received for
<pingInfoType>=1 (displayed only if at least one Echo response message
was received).
Round Trip Time in milliseconds. If the Echo Response message is not received within the time specified by
<timelimit> the value -1 is returned (e.g. when the bearer shuts down during command execution).
Number of sent packets.
Number of received packets.
Number of lost packets.
Lost packets in percent.
Minimum Round Trip Time in milliseconds.
Maximum Round Trip Time in milliseconds.
Average Round Trip Time in milliseconds.
<ip-address>
(str)
<request>
(num)
<timelimit>
(num)
<pingInfoType>
(num)
<roundTripTime>
(num)
<sent>
(num)
<received>
(num)
<lost>
(num)
<lostPercent>
(num)
<minRTT>
(num)
<maxRTT>
(num)
<meanRTT>
(num)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English