Cinterion
®
EHS6 AT Command Set
11.8 AT+CGEQMIN
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 296 of 513
Parameter Description
Parameter specifies a particular PDP context definition (see AT+CGDCONT parameter <cid>). The parameter
is used in other PDP context-related commands.
[0] conversational
1 streaming
2 interactive
3 background
This parameter indicates the maximum number of kbits/s delivered to UMTS (up-link traffic) at a SAP. As an
example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQMIN=...,32,...).
[0] subscribed value
1...63
64...568 (value needs to be divisible by 8 without remainder)
576...8640 (value needs to be divisible by 64 without remainder)
8700...16000 (value needs to be divisible by 100 without remainder)
This parameter indicates the maximum number of kbits/s delivered by UMTS (down-link traffic) at a SAP. As an
example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQMIN=...,32,...).
[0] subscribed value
1...63
64...568 (value needs to be divisible by 8 without remainder)
576...8640 (value needs to be divisible by 64 without remainder)
8700...16000 (value needs to be divisible by 100 without remainder)
This parameter indicates the guaranteed number of kbits/s delivered to UMTS (up-link traffic) at a SAP (provided
that there is data to deliver). As an example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQ-
MIN=...,32,...).
[0] subscribed value
1...63
64...568 (value needs to be divisible by 8 without remainder)
576...8640 (value needs to be divisible by 64 without remainder)
This parameter indicates the guaranteed number of kbits/s delivered by UMTS (down-link traffic) at a SAP (pro-
vided that there is data to deliver). As an example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQ-
MIN=...,32,...).
[0] subscribed value
1...63
<cid>
(num)(NV)
<Traffic class>
(num)(NV)
<Maximum bitrate UL>
(num)(NV)
<Maximum bitrate DL>
(num)(NV)
<Guaranteed bitrate UL>
(num)(NV)
<Guaranteed bitrate DL>
(num)(NV)