Cinterion
®
EHS6 AT Command Set
11.10 AT+CGEREP
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 304 of 513
URC 4
+CGEV: ME DETACH
The mobile equipment has forced a GPRS detach. This implies that all active contexts have been deactivated.
These are not reported separately.
URC 5
+CGEV: NW CLASS <class>
The network has forced a change of MS class. The highest available class is reported.
URC 6
+CGEV: ME CLASS <class>
The ME has forced a change of MS class. The highest available class is reported.
URC 7
+CGEV: ME PDN ACT <cid>
The ME has activated a context. The context represents a Primary PDP context in GSM/UMTS. The <cid>
for this context is provided to the TE. This event is sent either in result of explicit context activation request
(AT+CGACT), or in result of implicit context activation request associated to attach request (AT+CGATT=1).
Parameter Description
0
(P)
Buffer unsolicited result codes in the MT. If MT result code buffer is full, the old-
est ones will be discarded. No codes are forwarded to the TE.
1 Discard unsolicited result codes when MT TE link is reserved (e.g. in on line
data mode); otherwise forward them directly to the TE.
2 Buffer unsolicited result codes in the MT when MT TE link is reserved (e.g. in
on line data mode) and flush them to the TE when MT TE link becomes avail-
able; otherwise forward them directly to the TE. If MT result code buffer is full,
the oldest URCs will be discarded.
0 MT buffer of unsolicited result codes defined within this command is cleared
when <mode> 1 or 2 is entered
1 MT buffer of unsolicited result codes defined within this command is flushed to
the TE when <mode> 1 or 2 is entered (OK response will be given before flush-
ing the codes). Buffer is empty afterwards.
Parameter indicates the GPRS mobile class.
“B“ Class B
“CG“ Class C in GPRS mode
“CC“ Class C in circuit switched mode
<mode>
(num)
<bfr>
(num)
<class>
(str)
To Next Page
Loading...
Need help?
General
