Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
11.12 AT+CGQMIN
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 307 of 513
1 High Priority
Service commitments shall be maintained ahead of precedence classes 2 and
3
2 Normal priority
Service commitments shall be maintained ahead of precedence class 3
3 Low priority
Service commitments shall be maintained
Delay class
The delay parameter defines the end-to-end transfer delay incurred in the transmission of SDUs through the
GPRS network(s).
[0] network subscribed value
1..4 SDU size: 128 octets:

SDU size: 1024 octets:
Reliability class
[0] network subscribed value
1 Reliability class 1 was removed in 3GPP TS 23.107 [38] v6.1.0, and is auto-
matically mapped to reliability class 2.
2 Non real-time traffic, error-sensitive application that can cope with infrequent
data loss
3 Non real-time traffic, error-sensitive application that can cope with data loss,
GMM/SM, and SMS
4 Real-time traffic, error-sensitive application that can cope with data loss
5 Real-time traffic, error non-sensitive application that can cope with data loss
Peak throughput class (in octets per second).
[0] network subscribed value
1 Up to 1 000 (8 kbit/s).
2 Up to 2 000 (16 kbit/s).
3 Up to 4 000 (32 kbit/s).
<delay>
(num)(NV)
Delay Class Mean Transfer Delay 95 percentile
1 (Predictive) <0.5 <1.5
2 (Predictive) <5 <25
3 (Predictive) <50 <250
4 (Best Effort) Unspecified
Delay Class Mean Transfer Delay 95 percentile
1 (Predictive) <0.5 <1.5
2 (Predictive) <5 <25
3 (Predictive) <50 <250
4 (Best Effort) Unspecified
<reliability>
(num)(NV)
<peak>
(num)(NV)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English