Cinterion
®
EHS6 AT Command Set
13.2 AT+CRSM
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 354 of 513
Parameter to be passed on by the EHS6 to the USIM.
0...255
Parameter to be passed on by the EHS6 to the USIM.
0...255
Information which shall be written to the USIM (hexadecimal character format).
Contains the directory path of an elementary file on the UICC in hexadecimal format (e.g. "7F105F50").
Status information from the USIM about the execution of the actual command. It is returned in both cases, on
successful or failed execution of the command.
0...255
Status information from the USIM about the execution of the actual command. It is returned in both cases, on
successful or failed execution of the command.
0...255
Response data in case of a successful completion of the previously issued command.
"STATUS" and "GET RESPONSE" commands return data, which gives information about the currently selected
elementary data field. This information includes the type of file and its size.
After "READ BINARY" or "READ RECORD" commands the requested data will be returned.
<response> is empty after "UPDATE BINARY" or "UPDATE RECORD" commands.
<P2>
(num)
<P3>
(num)
<data>
(str)
<pathId>
(str)
<sw1>
(num)
<sw2>
(num)
<response>
(str)
To Next Page
Loading...
Need help?
General
