Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
17.3 AT^SJMSEC
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 416 of 513
Parameter Description
Command mode
“cmd“ Direct command mode 
The subsequent <CmdData> parameter contains the Java security com-
mands.
“file“ Indirect command mode 
The subsequent <CmdData> parameter specifies the filename, in which the
Java security command is stored. 
Each file shall be copied into the root directory of the module's flash file system.
To copy the files the MES shall be used.
Command data
If <CmdMode>= "cmd": ASCII coded hex data of the Java security command.
If <CmdMode>= "file": Name of the file which contains the Java security command (binary format).
Keystore usage
“0“ No keystore installed. Internal mode dedicated for manufacturer.
“1“
(D)
No keystore installed. Unsigned midlets can still be installed.
“2“ Keystore installed. Only signed midlets can be installed.
Security check
“0“
(D)
HTTPS connection or Secure Connection without check against the certificate
store.
“1“ HTTPS connection or Secure Connection with check against the certificate
store.
“0“ Start of Module Exchange Suite is not permitted.
“1“
(D)
Start of Module Exchange Suite is permitted.
HTTPS client certificate
“0“
(D)
Client certificate not installed.
“1“ Client certificate installed.
Error_codes
“1“ wrong command format
“2“ wrong command parameter format
“3“ parameter unknown
“4“ command unknown
“5“ parameter IMEI is missing
<CmdMode>
(str)
<CmdData>
(str)
<keystore_state>
(str)
<HTTPS_state>
(str)
<OBEX_state>
(str)
<HTTPS_cl_cert>
(str)
<error_code>
(str)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English