Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
18.8 AT^SRVCTL
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 447 of 513

Unsolicited Result Code
Response from the positioning service
In case of success:
^SRVCTL: "CBL" , "Loc" , <CBLCode>, <CBLLatitude>, <CBLLongitude>, <CBLAccuracy>[,
<CBLCountryCode>, <CBLCountry>, <CBLCity>]

OK
In case of error:
^SRVCTL: "CBL" , "Loc" , <CBLCode>, <CBLMessage>

ERROR

+CME ERROR: <err>
The URC will be issued when the positioning service has successfully queried the location, or encounterd an
error.

Parameter Description
Actions for COMBAIN service
The functionality provided by COMBAIN service.
“Enable“ Enable COMBAIN service.
“Disable“ Disable COMBAIN service.
“Loc“ Query location in blocking mode.
“Crd“ Query the remaining number of credits of COMBAIN service.
Write Command
Start a positioning service. Result will be reported via URC (if enabled with <CBLUrc> parameter of
AT^SRVCFG).
AT^SRVCTL="CBL" , "Start"
Response(s)
In case of success:
OK
In case of error:
^SRVCTL: "CBL" , "Loc" , <CBLCode>, <CBLMessage>
ERROR
+CME ERROR: <err>
Write Command
Stop the running positioning service.
AT^SRVCTL="CBL" , "Stop"
Response(s)
In case of success:
OK
In case of error:
^SRVCTL: "CBL" , "Loc" , <CBLCode>, <CBLMessage>
ERROR
+CME ERROR: <err>
PIN  Last
- - -
<CBLAction>
(str)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English