Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
18.8 AT^SRVCTL
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 448 of 513
“Start“ Start a positioning service.
“Stop“ Stop the running positioning service.
Result codes of COMBAIN service
This parameter indicates the result of execution.
0 success
1 common errors
2 request quota exceeded
3 invalid key
4 invalid device ID (IMEI)
5 invalid request number
6 invalid input parameters
Result messages of COMBAIN service
This parameter shows the detail of the error, e.g "unsuccessful positioning, cells and wifi access points not
found","warning: already stared", "warning: get imei information failed", "network error".
Latitude information from positioning result
The latitude result calculated by cell information, e.g "55.71123".
Longitude information from positioning result
The longitude result calculated by cell information, e.g "-13.21412".
Accuracy of the positioning result
The accuracy is the median error in meters.
Country code from the positioning result
This parameter shows the country code of the Country (e.g. "DE" for Germany).
Country name from the positioning result
This parameter represents the country name in text format (e.g. "Germany").
City name from the positioning result
This parameter indicates the city that is closest to the positioning result.
<CBLCode>
(num)
<CBLMessage>
(str)
<CBLLatitude>
(num)
<CBLLongitude>
(num)
<CBLAccuracy>
(num)
<CBLCountryCode>
(str)
<CBLCountry>
(str)
<CBLCity>
(str)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English