Cinterion
®
EHS6 AT Command Set
19.5 AT^SLED
EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 458 of 513
1
(D)
LED lights steadily when the ME is registered to the network and either awake
or in power saving state.
2 LED is flashing when the ME is in Limited Service or registered with a network
and either awake or in power saving state. The duration of flashing can be con-
figured using the parameter <flash>.
LED flash period
1...50 LED flash period (in milliseconds) if <mode>=2.
LED off-time between flashing is approximately 4 seconds and is not configu-
rable.
<flash>
(num)(&W)
To Next Page
Loading...
