Gemalto Cinterion EHS6 - Page 54

Cinterion
®
EHS6 AT Command Set 
2.12 AT^SCFG
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 54 of 513
^SCFG: "Serial/USB/DDD" , <deviceDescr>, <descrIndex>, <langId>, <vendorId>, <productId>,
<manufacturer>, <product>, <serialNo>
^SCFG: "Tcp/IRT", <tcpIrt>
^SCFG: "Tcp/MR", <tcpMr>
^SCFG: "Tcp/OT", <tcpOt>
^SCFG: "Tcp/WithURCs", <tcpWithUrc>
^SCFG: "Trace/Syslog/OTAP", <otapTracer>[, <uwDevice>, <intvalue>, <filename>), <logmode>,
<blockmode>]
^SCFG: "URC/Ringline", <urcRinglineCfg>
^SCFG: "URC/Ringline/ActiveTime", <urcRinglineDuration>
^SCFG: "Userware/Autostart", <ua>
^SCFG: "Userware/Autostart/Delay", <uad>
^SCFG: "Userware/DebugInterface", <udbgif1>, <udbgif2>, <udbgif3>
^SCFG: "Userware/DebugMode", <userwaremode>
^SCFG: "Userware/Passwd"
^SCFG: "Userware/Stdout", <uwDevice>[, <intvalue>[, <filename>[, <logmode>]]], <blockmode>
^SCFG: "Userware/Watchdog", <wd>
OK
Write Command
Configure Audio Loop:
AT^SCFG="Audio/Loop"[, <al>]
Response(s)
^SCFG: "Audio/Loop", <al>
OK
ERROR
+CME ERROR: <err>
Write Command
Select eCall ACK timeout in milliseconds.
AT^SCFG="Call/Ecall/AckTimeout"[, <acktimeout>]
Response(s)
^SCFG: "Call/Ecall/AckTimeout", <acktimeout>
OK
ERROR
+CME ERROR: <err>
Write Command
Configure the inband modem for mobile terminate calls.
AT^SCFG="Call/Ecall/Callback"[, <callback>]
Response(s)
^SCFG: "Call/Ecall/Callback"
OK
ERROR
+CME ERROR: <err>
Write Command
Select eCall callback timeout in milliseconds.
AT^SCFG="Call/Ecall/CallbackTimeout"[, <callbacktimeout>]
Response(s)
^SCFG: "Call/Ecall/CallbackTimeout", <callbacktimeout>
OK
Read Command (Continued)
AT^SCFG?
Response(s)