Gemalto Cinterion EHS6 - Page 55

Cinterion
®
EHS6 AT Command Set 
2.12 AT^SCFG
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 55 of 513
ERROR
+CME ERROR: <err>
Write Command
Select Msd data for eCall.
AT^SCFG="Call/Ecall/Msd"[, <msd>]
Response(s)
^SCFG: "Call/Ecall/Msd", <msd>
OK
ERROR
+CME ERROR: <err>
Write Command
Control Inband modem for Pull mode.
AT^SCFG="Call/Ecall/Pullmode"[, <pullmode>]
Response(s)
^SCFG: "Call/Ecall/Pullmode", <pullmode>
OK
ERROR
+CME ERROR: <err>
Write Command
Select eCall start timeout in milliseconds.
AT^SCFG="Call/Ecall/StartTimeout"[, <starttimeout>]
Response(s)
^SCFG: "Call/Ecall/StartTimeout", <starttimeout>
OK
ERROR
+CME ERROR: <err>
Write Command
Select eCall session timeout in milliseconds.
AT^SCFG="Call/Ecall/SessionTimeout"[, <sessiontimeout>]
Response(s)
^SCFG: "Call/Ecall/SessionTimeout", <sessiontimeout>
OK
ERROR
+CME ERROR: <err>
Write Command
Query/Configure Emergency numbers for USIM without ECC field
AT^SCFG="Call/ECC"[, <ecc>]
Response(s)
^SCFG: "Call/ECC", <ecc>
OK
ERROR
+CME ERROR: <err>
Write Command (Continued)
Select eCall callback timeout in milliseconds.
AT^SCFG="Call/Ecall/CallbackTimeout"[, <callbacktimeout>]
Response(s)