Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
3.2 AT^SIND
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 98 of 513
Set or query URC presentation mode of a specific indicator <indDescr>.
0
(P)
Disables the presentation of a specific URC.
1 Enables the presentation of a specific URC. An error will be returned when
<indDescr> is set to "simtray".
2 Requests the presentation mode of the URC status and the current value of a
single indicator type.
Indicates number of new voice messages. Refer to <indDescr>.
Indicates number of new fax messages. Refer to <indDescr>.
Indicates number of new email messages. Refer to <indDescr>.
Indicates number of new other messages. Refer to <indDescr>.
Operator in format which depends on the type associated to the operator name. Refer to <indValue>.
Service Provider Name according to the status settings (USIM Service No. 17) in the USIM Service Table (SST)
of the USIM. 
Service Provider Name (SPN) will be read from EF
SPN
.
Universal Time delivered as part of the "nitz" Indicator. Refer to <indDescr>.
Time Zone delivered as part of the "nitz" Indicator. Refer to <indDescr>.
Adjustment for Daylight Saving Time as part of the "nitz" Indicator. Refer to <indDescr>.
Warning Level
0-11 User value to limit the indication of radio link errors.
Refer to <indDescr>.
5 Broadcast MCC-MNC in numeric format consisting of a 3-digit country code
plus a 2- or 3-digit network code.
<mode>
(num)
<mwiVoice>
(num)
<mwiFax>
(num)
<mwiEmail>
(num)
<mwiOther>
(num)
<eonsOperator>
(str)(+CSCS)
<servProvider>
(str)(+CSCS)
<nitzUT>
(str)(+CSCS)
<nitzTZ>
(num)
<nitzDST>
(num)
<lstaLevel>
(num)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English