Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
3.2 AT^SIND
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 99 of 513
EDVS (0-11)
Error Downcounter value scaled. Refer to <indDescr>.
value in dBm 
Received signal strength indication value. Refer to <indDescr>.
Number of reported channels. Refer to <indDescr>.
value in dBm 
Minimal received signal strength value. Refer to <indDescr>.
value in dBm 
Maximal received signal strength value. Refer to <indDescr>.
value in dBm 
Mean value of received signal strength across frequency. Refer to <indDescr>.
Variance of signal strength across frequency. Refer to <indDescr>.
Number of consecutive DRX cycles that serving cell does not meet S-criteria. Refer to <indDescr>.
value in dBm 
Received Signal Code Power. Refer to <indDescr>.
value in dBm 
The noise indicator derived from <lstaRscp> and the Io from <lstaEcIo>. Refer to <indDescr>.
Received energy per chip divided by the power density in the band. Refer to <indDescr>.
Number of reported frequencies. Refer to <indDescr>.
Number of scanned frequencies. Refer to <indDescr>.
<lstaEdvs>
(num)
<lstaRssi>
(num)
<lstaNo>
(num)
<lstaMin>
(num)
<lstaMax>
(num)
<lstaMean>
(num)
<lstaVar>
(num)
<lstaDrxCount>
(num)
<lstaRscp>
(num)
<lstaNoise>
(num)
<lstaEcIo>
(num)
<lstaFrRep>
(num)
<lstaFrScnd>
(num)

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English