HP LaserJet Enterprise M552 - Page 111

●
Reports
●
Conguration/Status Pages
●
Supplies Status Page
c. Touch the Print button to print the page, and then check the maintenance items (listed below in
this step).
Print a supplies status page from an LCD control panel
a. From the Home screen on the printer control panel, use the down arrow button to scroll to
Administration, and then press the OK button.
b. If necessary, use the down arrow button to scroll to Reports, and then press the OK button.
c. If necessary, use the down arrow button to scroll to Conguration/Status Pages, and then press
the OK button.
d. Use the down arrow button to scroll to Supplies Status Page, and then press the OK button to
select it.
e. Use the up arrow button to scroll to Print, and then press the OK button to print the page, and
then check the maintenance items (listed below in this step).
NOTE: HP long-life consumables and maintenance kit life specications are estimations. Actual
individual life/yield during normal use varies depending on usage, environment, media, and other
factors. Estimated life is not an implied guarantee or warrantable.
●
Fuser kit; estimated life: 150,000 images (depending on usage and average number of pages per
job)
◦
B5L35-67902 (110V)
◦
B5L36-67902 (220V)
●
Document feeder maintenance kit; estimated life: 75,000 pages
◦
B5L52-67903
6. Verify that the correct print driver for this printer is installed. Check the program to make sure that the
print driver for this printer is used. The print driver is on the CD that came with the printer, or can be
downloaded from this Web site: www.hp.com/support/colorljM552, www.hp.com/support/colorljM553,
www.hp.com/support/colorljM577MFP.
7. Print a short document from a dierent program that has worked in the past. If this solution works, the
problem is with the program. If this solution does not work (the document does not print), complete
these steps:
a. Try printing the job from another computer that has the printer software installed.
b. If the printer is connected to the network, connect the printer directly to a host computer with a
USB cable. Redirect the printer to the correct port, or reinstall the software (make sure to select the
new connection type).
ENWW Solve problems checklist 83