HP LaserJet Enterprise M552 - General Print Settings menu

General Print Settings menu
To display: At the printer control panel, select the Administration menu, and then select the General Print
Settings menu.
In the following table, asterisks (*) indicate the factory default setting.
NOTE: For the M553x model, use the Save button to save a selected option.
For all other models, use the up arrow button or down arrow button to highlight an option, and then
press the OK button to save the selected option.
Table 2-37 General Print Settings menu
First level Second level Values Description
Manual Feed Enabled
Disabled*
Use to enable or disable the
manual-feed feature, which allows
the user to feed paper into the
printer by hand. When this feature
is enabled, the user can select
manual feed from the control
panel as the paper source for a job.
If a tray is not specied as part of a
job, manual feed is selected.
Courier Font Regular*
Dark
Select which version of the Courier
font to use. The factory default
setting is Regular, which uses an
average stroke width. The Dark
setting can be used if a heavier
Courier font is needed.
Wide A4 Enabled
Disabled*
Changes the printable area of A4-
size paper. When enabled, eighty
10-pitch characters can be printed
on a single line of A4 paper.
Print PS Errors Enabled
Disabled*
Use this feature to select whether
a PostScript (PS) error page is
printed when the printer
encounters a PS error.
Print PDF Errors Enabled
Disabled*
Selects whether a PDF error page
is printed when the printer
encounters a PDF error.
Personality Auto*
PCL
POSTSCRIPT
PDF
Congures the default print
language or personality for the
printer. Normally the printer
language should not be changed. If
this item is changed to a specic
printer language, the printer does
not automatically switch from one
language to another unless specic
software commands are sent to it.
232 Chapter 2 Solve problems ENWW