HP LaserJet Enterprise M552 - 44.A0.XX Error Event log message; 47.XX.XX Error Messages; 47.00.XX; 47.01.XX

Recommended action
1. Try to send the job again.
2. Check the fax settings to make sure they are set to the proper settings for the environment.
3. If the issue persists, see document - “Solve fax problem” for additional fax troubleshooting information.
44.A0.XX Error Event log message
Description
MFP specic error dealing with the Digital send abilities for Security (Login/LDAP/SSL)
Recommended action
1. Turn the printer o then on again. Try to login or send the job again.
2. Make sure all Digital Sending Devices are operational and properly congured.
One or more Control Panel Icons for digatl send features may be "Grayed Out" and Marked with and
exclamation Point "!"
3. The user should contact an administrator. The administrator needs to check the Domain Controller
certicate and make sure a valid SSL exists in the location on the LDAP server pointed to by the SSL
extension in the certicate.
47.XX.XX Error Messages
47.00.XX
Description
Back channel internal error.
Recommended action
1. Turn the product o, and then on again.
2. Resend the print job.
3. If the error persists, clear the active partition by using the Partial Clean item in the Preboot menu.
47.01.XX
Description
Image transformer internal error.
Recommended action
1. Turn the product o, and then on again.
2. Resend the print job.
3. If the error persists, clear the active partition by using the Partial Clean item in the Preboot menu.
328 Chapter 2 Solve problems ENWW