30.03.45 Scanner Error To continue turn o then on
Description
Scanner control board (SCB) rmware assertion failure. SCB rmware assert controls the scan head motor.
Recommended action
1. Turn the product o, and then on again.
2. Upgrade the rmware.
3. Replace the scanner control board (SCB).
4. Replace the image scanner assembly.
31.XX.YZ Error Messages
1 Stapler power
2 SCB Power (24v)
3 PAB to SCAM Communication (HDMI)
4 Flatbed sensors (ADF open and Flatbed media length_ and Cave LED
5 Flatbed (S1) Flat exible cable (Scanner data and atbed motor)
6 ADF (S2) Flat exible cable (Scanner data)
7 ADF Motors (Feed and Deskew)
8 ADF Sensors (Prescan, media present receiver and top hatch)
9 ADF Ultra sonic sensor receiver and deskew sensor
10 LTR/LGL (letter/legal) Input tray sensor
11 Ultra sonic sensor transmitter
302 Chapter 2 Solve problems ENWW