HP LaserJet Enterprise M552 - Step 3: Clean the Tray 1 rollers

4. Release one tab (callout 1), and then rotate the end of the roller out and away from the holder
(callout 2).
TIP: It might be necessary to use a small at-blade screwdriver to complete this step.
Figure 2-103 Release one tab
1
2
5. Slide the roller out of the holder to remove it.
Figure 2-104 Remove the roller
Step 3: Clean the Tray 1 rollers
▲
Use a damp, lint-free cloth to gently clean the rollers.
CAUTION: When handling the rollers, avoid touching the roller surfaces. Skin oils and ngerprints on a
roller surface can cause print-quality problems.
422 Chapter 2 Solve problems ENWW