Change jam recovery
This printer provides a jam recovery feature that reprints jammed pages.
Change jam recovery from a touchscreen control panel
1. From the Home screen on the printer control panel, scroll to and touch the Administration button.
2. Open the General Settings menu, and then open the Jam Recovery menu.
3. Select one of the following options:
●
Automatic — The printer attempts to reprint jammed pages when suicient memory is available.
This is the default setting.
●
O — The printer does not attempt to reprint jammed pages. Because no memory is used to store
the most recent pages, performance is optimal.
NOTE: Some pages can be lost if the printer runs out of paper while printing a duplex job with
Jam Recovery set to O.
●
On — The printer always reprints jammed pages. Additional memory is allocated to store the last
few pages printed.
Change jam recovery from an LCD control panel
1. From the Home screen on the printer control panel, use the down arrow button to scroll to
Administration, and then press the OK button.
2. Use the down arrow button to scroll to General Settings, and then press the OK button.
3. Use the down arrow button to scroll to Jam Recovery, and then press the OK button.
4. Use the down arrow button to scroll to an option, and then press the OK button to select it.
●
Automatic — The printer attempts to reprint jammed pages when suicient memory is available.
This is the default setting.
●
O — The printer does not attempt to reprint jammed pages. Because no memory is used to store
the most recent pages, performance is optimal.
NOTE: Some pages can be lost if the printer runs out of paper while printing a duplex job with
Jam Recovery set to O.
●
On — The printer always reprints jammed pages. Additional memory is allocated to store the last
few pages printed.
ENWW Solve paper handling problems 471
To Next Page
Loading...