Scan/Digital Send Settings menu (M577 only)
To display: At the product control panel, select the Administration menu, and then select the Scan/Digital 
Send Settings menu.
In the following table, asterisks (*) indicate the factory default setting.
Table 2-35 Scan/Digital Send Settings menu (M577 only)
First level Second level Third level Fourth level Values Description
E-mail Settings
Save to Network 
Folder Options
Save to USB Options
NOTE: The same 
options are available 
for each of these 
features, except 
where noted.
E-mail Setup Wizard
NOTE: Email 
Settings only
      Use to congure 
settings that apply to 
sending documents 
through email or 
saving documents to a 
folder on the network 
or on a USB multi-
drive.
The E-mail Setup 
Wizard feature 
congures the product 
to send scanned 
images as email 
attachments. To open 
the product HP 
Embedded Web Server 
and set up the email 
notication server, 
enter the product IP 
address into a Web 
browser.
ENWW Tools for troubleshooting 209