HP LaserJet Enterprise M552 - 41.XX.YZ Error To continue, touch “OK”

●
Y = D: Envelope 1, 2, or 3 mode
●
Y = E: Rough
●
Y = F: Other mode
●
Z = 0: Photo Media (1, 2, or 3)
●
Z = 1: Auto Sense (Normal)
●
Z = 2: Normal (typed not from Auto Sense)
●
Z = 3: Light media 1, 2, or 3 mode
●
Z = 4: Heavy media 1
●
Z = 5: Heavy media 2
●
Z = 6: Heavy media 3
●
Z = 7: Glossy media 1
●
Z = 8: Glossy media 2
●
Z = 9: Glossy media 3
●
Z = A: Glossy lm
●
Z = B: OHT
●
Z = C: Label
●
Z = D: Envelope 1, 2, or 3 mode
●
Z = E: Rough
●
Z = F: Other mode
Recommended action
1. Load the tray with the size and type of paper indicated, or use another tray if available.
2. If this message displays and the tray is loaded with the correct paper type, check the print driver
settings to make sure they match the tray type settings.
3. Check all application and printer settings to make sure that the Type setting is correct.
41.XX.YZ Error To continue, touch “OK”
Description
This section covers all other errors of the form 41.XX.YZ not covered in the previous sections.
A printer error has occurred.
XX = error type
Y = fuser mode
324 Chapter 2 Solve problems ENWW