HP LaserJet Enterprise M552 - Step 3: Clean the Tray 2-X rollers; Step 4: Install the Tray 2-X separation roller

3. Slide the roller assembly straight up to remove it.
Figure 2-127 Remove the roller assembly
Step 3: Clean the Tray 2-X rollers
▲
Use a damp, lint-free cloth to gently clean the rollers.
CAUTION: When handling the rollers, avoid touching the roller surfaces. Skin oils and ngerprints on a
roller surface can cause print-quality problems.
NOTE: The number of rollers depends on the number input accessories installed.
Figure 2-128 Clean the rollers
Step 4: Install the Tray 2-X separation roller
1. Slide the roller assembly straight into the tray to install it.
434 Chapter 2 Solve problems ENWW