Clearing event log
Description
This message is displayed while the event log is cleared. The printer exits the menus when the event log has
been cleared.
Recommended action
No action necessary.
Clearing paper path
Description
The printer is attempting to eject jammed paper.
paper is detected in the paper path. The printer will attempt to eject it.
Recommended action
No action necessary. Check the progress at the bottom of the control panel display.
If a jam is not cleared, remove the paper.
if Jam does not clear with all media removed, when the printer detects an open and close door it should come
up with the Jam error. Troubleshoot the specic jam.
Close front door
Description
The front door is open.
This message appears even though the top front door is closed.
Recommended action
1. Close the front door.
2. Check the projection part on the front door. If it is damaged, replace the front door assembly.
3. Use the front door switch (SW1) test in the Manual sensor test to verify that the switch is properly
functioning. If the switch fails the test, replace the switch.
4. Reconnect the connector (J101) on the DC controller PCA.
5. If the problem persists, replace the front door switch (SW1). PN: RM2-7206-000CN Interlock switch
Close lower right door
Description
The optional paper feeder right door is open.
ENWW Tools for troubleshooting 363
To Next Page
Loading...