HP LaserJet Enterprise M552 - Clean the printer; Clean the paper path; Print a cleaning page

Clean the printer
NOTE: To clean the printer exterior, use a soft, water-moistened cloth.
●
Clean the paper path
●
Print a cleaning page
●
Clean the Tray 1 rollers
●
Clean the Tray 2-X rollers
●
Check the scanner glass for dirt and smudges (M577 only)
●
Clean the pickup rollers and separation pad in the document feeder (M577 only)
Clean the paper path
Over time, particles of toner and paper accumulate inside the printer. This can cause print-quality problems
during printing. Cleaning the paper path eliminates or reduces these problems.
Clean the paper path and toner-cartridge areas every time that the toner cartridge is changed or whenever
print-quality problems occur. As much as possible, keep the printer free from dust and debris.
Print a cleaning page
Print the cleaning from a touchscreen control panel
1. From the Home screen on the printer control panel, scroll to and touch the Device Maintenance button.
2. Open the following menus:
●
Calibration/Cleaning
3. Touch Cleaning Page, and then press the OK button to print the page.
4. The cleaning process can take several minutes. When it is nished, discard the printed page.
Print the cleaning page from an LCD control panel
1. From the Home screen on the printer control panel, use the down arrow button to scroll to Device
Maintenance, and then press the OK button.
2. Use the down arrow button to scroll to Calibration/Cleaning, and then press the OK button.
3. If necessary, use the down arrow button to scroll to Cleaning, and then press the OK button to print
the page.
4. Follow the instruction on the printed cleaning page to nish the cleaning page process.
ENWW Clean the printer 417