the paper is reinserted. With this message, printing stops until the user touches the OK button, which allows
time for straightening the output stack.
Recommended action
1. Maintaining the same orientation, remove the pages from the output bin.
2. Flip the document printed side up.
3. Load the document in Tray 1.
4. Touch the OK button to print the second side of the job.
Manually feed: <Type><Size> To use another tray, press “OK”
Description
This message displays when manual feed is selected, Tray 1 is loaded, and other trays are available.
Recommended action
1. Load tray with the requested paper.
2. If paper is already in tray, press the Help button to exit the message, and then press the OK button to
print.
3. To use another tray, clear paper from Tray 1, press the Help button to exit the message, and then press
the OK button.
Moving solenoid and motor
Description
The solenoid and a motor are moving as part of a component test.
Recommended action
No action necessary.
To exit, press the Stop button .
Moving solenoid To exit press
Description
The solenoid is moving as part of a component test.
Recommended action
No action necessary.
To exit, press the Stop button
No job to cancel
Description
The user pressed the Stop button , but the printer is not actively processing any jobs.
372 Chapter 2 Solve problems ENWW
To Next Page
Loading...