Default Print Options menu
To display: At the printer control panel, select the Administration menu, and then select the Default Print
Options menu.
In the following table, asterisks (*) indicate the factory default setting.
NOTE: For the M553x model, use the Save button to save a selected option.
For all other models, use the up arrow button or down arrow button to highlight an option, and then
press the OK button to save the selected option.
Table 2-38 Default Print Options menu
First level Second level Values Description
Number of Copies Range: 1–32000
Default = 1
Sets the default number of copies
for a copy job. This default applies
when the Copy function or the
Quick Copy function is initiated
from the printer Home screen.
Default Paper Size Select from a list of sizes that the
printer supports.
Congures the default paper size
used for print jobs.
Default Custom Paper Size X Dimension Range: 3–8.5 inches
Default = 8.5 inches
Congures the default paper size
that is used when the user selects
Custom as the paper size for a
print job.
Y Dimension Range: 5–14 inches
Default = 14 inches
Use Inches Enabled*
Disabled
Sides 1-sided*
2-sided
Use this item to indicate whether
the original document is printed on
one or both sides, and whether the
copies should be printed on one or
both sides. For example, select the
1-sided original, 2-sided output
option when the original is printed
on one side, but the print job
requires two-sided copies.
Select the Orientation setting to
specify portrait or landscape
orientation and to select the way
the second sides are printed.
ENWW Tools for troubleshooting 235
To Next Page
Loading...