HP LaserJet Enterprise M552 - Fax Settings menu (M577 only)

Fax Settings menu (M577 only)
To display: At the product control panel, select the Administration menu, and then select the Fax Settings
menu.
In the following table, asterisks (*) indicate the factory default setting.
Table 2-36 Fax Settings menu (M577 only)
First level Second level Third level Fourth level Values Description
Fax Send Settings Fax Send Setup Fax Setup Wizard Congure settings for
sending faxes from
the product.
Use the Fax Setup
Wizard feature to set
up options for faxing.
NOTE: To set up LAN
fax or Internet fax,
use the HP Embedded
Web Server. To open
the HP Embedded Web
Server, type the
product network
address into a Web
browser. To congure
the fax features,
select the Fax tab.
Fax Dialing Settings Fax Dial Volume O
Low*
High
These settings control
how the fax modem
dials the outgoing fax
number when faxes
are sent.
Dialing Mode Tone*
Pulse
Redial Interval 1 – 5 Minutes
Default = 5 minutes
Fax Send Speed Fast*
Medium
Slow
Dialing Prex
Detect Dial Tone
Redial on Error Range: 0 – 9
Default = 2
Redial on No Answer Range: 0 – 2
Default = 0
Redial on Busy Range: 0 – 9
Default = 3
ENWW Tools for troubleshooting 219