HP LaserJet Enterprise M552 - 99.00.04 Upgrade not performed timeout during receive; 99.00.05 Upgrade not performed timeout during receive; 99.00.06 Upgrade not performed error reading upgrade; 99.00.07 Upgrade not performed error reading upgrade

99.00.04 Upgrade not performed timeout during receive
Description
A remote rmware upgrade (RFU) was not performed.
The issue is an I/O timeout when reading the header.
Recommended action
The most common cause is an issue with the network environment.
Make sure that there is a good network connection to the product, and then attempt the rmware upgrade
again, or upgrade using the USB walk-up port.
99.00.05 Upgrade not performed timeout during receive
Description
A remote rmware upgrade (RFU) was not performed.
The issue is an I/O timeout when reading image data.
Recommended action
The most common cause is an issue with the network environment.
Make sure that there is a good network connection to the product, and then attempt the rmware upgrade
again, or upgrade using the USB walk-up port.
99.00.06 Upgrade not performed error reading upgrade
Description
A remote rmware upgrade (RFU) was not performed.
The issue is an unexpected read error when reading the header number and size.
Recommended action
1. Download the RFU le, and then attempt the upgrade again.
2. If the error persists, replace the hard disk.
99.00.07 Upgrade not performed error reading upgrade
Description
A remote rmware upgrade (RFU) was not performed.
The issue is an unexpected read error when reading the rest of the header.
Recommended action
1. Download the RFU le, and then attempt the upgrade again.
2. If the error persists, replace the hard disk.
ENWW Tools for troubleshooting 353