HP LaserJet Enterprise M552 - Network Settings menu

Network Settings menu
To display: At the printer control panel, select the Administration menu, and then select the Network Settings
menu.
In the following table, asterisks (*) indicate the factory default setting.
NOTE: For the M553x model, use the Save button to save a selected option.
For all other models, use the up arrow button or down arrow button to highlight an option, and then
press the OK button to save the selected option.
Table 2-42 Network Settings menu
First level Values Description
I/O Timeout Range: 5 – 300 sec
Default = 15
Use to set the I/O timeout period in seconds. I/O
timeout refers to the elapsed time before a
print job fails. If the stream of data that the
printer receives for a print job is interrupted,
this setting indicates how long the printer will
wait before it reports that the job has failed.
Wireless Menu See Table 2-43 Wireless Menu on page 246 for
details.
Embedded Jetdirect Menu See Table 2-44 Embedded Jetdirect Menu
on page 246 for details. These menus have the
same structure. If an additional HP Jetdirect
network card is installed in the EIO slot, then
both menus are available.
Table 2-43 Wireless Menu
First level Second level Third level Fourth level Values Description
Wii-Fi Direct Status On
O*
Please refer to the
Jetdirect
Administrator's Guide
Security Secure Web HTTPS Required*
HTTPS Optional
Please refer to the
Jetdirect
Administrator's Guide
Reset Security Yes
No*
Please refer to the
Jetdirect
Administrator's Guide
Table 2-44 Embedded Jetdirect Menu
First level Second level Third level Fourth level Values Description
Information Print Sec Report Yes
No*
Yes: Prints a page that
contains the current
security settings on
the HP Jetdirect print
server.
No: A security settings
page is not printed.
246 Chapter 2 Solve problems ENWW