●
Light media
●
Glossy media 1
●
Glossy media 2
●
Glossy media 3
●
LBP_OHT
The DC controller determines a media sensor error and reports it to the formatter when the value detected by
the media sensor is out of a specied range of values.
Figure 1-35 Media sensors
Optical sensor
Ultrasonic sensor
Registration unit
Feed speed control
The DC controller adjusts the feed speed to improve the print quality depending on the paper type. The paper
is fed at a specied speed according to the print mode designated by the formatter.
Table
1-21 Print mode and feed speed
Print mode
Feed speed
1
Media sensor detection
Normal 1/1 Yes
Heavy media 1 Pro No
Heavy media 2 1/2 Yes
Heavy media 3 1/3 Yes
Light media 1 1/1 Yes
Light media 2 1/1 Yes
Light media 3 1/3 Yes
ENWW Pickup, feed, and delivery system 59
To Next Page
Loading...