HP LaserJet Enterprise M552 - Fuser Kit very low To continue, touch “OK”; Gateways failed; Genuine HP supply installed; HP Secure hard drive disabled

Fuser Kit very low To continue, touch “OK”
Description
10.23.70 (event code)
The printer indicates when a supply is very low.
After an HP supply has reached the very low threshold, the HP premium protection warranty for that supply
has ended.
Recommended action
Replace the fuser.
After replacing the fuser, reset the fuser page counter by selecting New Fuser Kit in the Reset Supplies sub-
menu.
Gateways failed
Description
There is an incorrect gateways conguration.
Recommended action
Use the EIO <X> Jetdirect menu to congure the default gateway.
Genuine HP supply installed
Description
10.00.40 (event code) - Black print cartridge
A new genuine HP toner cartridge has been installed.
Recommended action
Touch the Hide button to remove this message.
HP Secure hard drive disabled
Description
The HP high-performance hard disk is disabled, or the printer does not recognize the hard disk.
After an encrypted hard disk is paired with a specic printer, it cannot be used in another printer unless it is re-
initialized.
NOTE: After the encrypted hard disk is paired to the printer, all other hard disks are disabled.
Recommended action
Remove the drive or use the HP Embedded Web Server for more information.
1. Open the embedded Web server by typing the printer IP address into a Web browser.
2. Select the Digital Sending tab.
ENWW Tools for troubleshooting 367