HP LaserJet Enterprise M552 - 41.04.YZ Printer Error

NOTE:
●
SR6 Top Sensor connects to DCC on J118.
●
SR9 Fuser Delivery sensor connects to Fuser PCA on J2603 then to interconnect J50 then to DCC on
J116.
●
SR13 and SR14 Media Width sensors connect to DCC on J118.
10. Test registration assembly motor and clutch. If not function properly replace the registration assembly.
If the error persists, replace the lifter assembly.
41.04.YZ Printer Error
Description
An unknown misprint error occurred on the printer.
Y = Type, Z = Tray
●
Y = 0: Photo Media (1, 2, or 3)
●
Y = 1: Auto Sense (Normal)
●
Y = 2: Normal (typed not from Auto Sense)
●
Y = 3: Light media 1, 2, or 3 mode
●
Y = 4: Heavy media 1
●
Y = 5: Heavy media 2
●
Y = 6: Heavy media 3
●
Y = 7: Glossy media 1
●
Y = 8: Glossy media 2
●
Y = 9: Glossy media 3
●
Y = A: Glossy lm
●
Y = B: OHT
●
Y = C: Label
●
Y = D: Envelope 1, 2, or 3 mode
●
Y = E: Rough
●
Y = F: Other mode
●
Z = D Source is the duplexer.
●
Z = 0 Source is the envelope feeder.
●
Z = 1 Source is Tray 1.
●
Z = 2 Source is Tray 2.
●
Z = 3 Source is Tray 3.
322 Chapter 2 Solve problems ENWW