Telnet client
Enable the Windows telnet client
All computers using the Windows operating system have the telnet client installed, however, the telnet client
function might not be enabled by default.
NOTE: The gures and menus in this section are for the Windows 7 Enterprise
®
operating system. Screens
and menu selections might vary slightly for other operating systems.
1. Use the Start menu to open the Control Panel, and then click the Programs item to select it.
Figure 2-4 Open the Control Panel
2. Click the Turn Windows features on or o item to select it.
Figure 2-5 Turn Windows features on or o
ENWW Solve problems checklist 99
To Next Page
Loading...