Internal disk spinning up
Description
The internal disk device is spinning up its platter. Jobs that require disk access must wait.
Recommended action
No action necessary.
Load Tray <X>: [Type], [Size] To use another tray, press “OK”
Description
This message displays when the indicated tray is selected, but is not loaded, and other paper trays are
available for use.
It also displays when the tray is congured for a dierent paper type or size than the print job requires.
Recommended action
1. Load the correct paper in the tray.
2. If prompted, conrm the size and type of paper loaded.
3. Otherwise, press the OK button to select another tray.
4. If error persists, use the cassette paper present sensor test in the Tray/bin manual sensor test to verify
that the sensor is functioning correctly.
5. Make sure that the sensor ag on the paper presence sensor is not damaged and moves freely.
6. Reconnect the corresponding connector.
●
Printer cassette: connectors (J22) on the cassette media feed sensor and the connector (J121) on
the DC controller PCA.
●
1 X 500-sheet paper feeder cassette: interconnect (J2042 and J2042) on the paper feeder cassette
media feed sensor and the connector (J1904) on the paper feeder controller PCA.
Loading program <XX>
Description
Programs and fonts can be stored on the printer’s le system and are loaded into RAM when the printer is
turned on. The number <XX> species a sequence number indicating the current program being loaded.
Recommended action
No action necessary.
NOTE: Do not turn the printer o.
Manually feed output stack Then touch "OK" to print second side
Description
The rst side of a manual duplex job printed and the printer is waiting for the user to insert the output stack
to complete the second side. For the normal Manually Feed message, printing continues automatically when
ENWW Tools for troubleshooting 371
To Next Page
Loading...