If the test fails, replace the drum motor. RM2-0078-000CN
4. Reconnect the connector (J42) of the drum motor 3 and connector (J111) on the DC controller PCA.
59.08.50 or 59.08.60
Description
The printer experienced a Yellow Drum Motor (M1) error
●
59.05.50 — Yellow drum motor startup abnormality
●
59.05.60 — Yellow drum motor rotation abnormality
Recommended action
1. Turn the printer o.
2. Remove the Yellow Cartridge and turn the printer back on.
3. Use the disable cartridge check and run the drum motor component test with the print cartridge
removed.
If the test passes, replace the print cartridge. If the printer has been serviced, check the connector at the
drum motor assembly and the DC controller.
If the test fails, replace the drum motor. RM2-0078-000CN
4. Reconnect the connector (J41) of the drum motor 3 and connector (J111) on the DC controller PCA.
60.00.0Y, 62.00.00 Error Messages
62.00.00 No system To continue turn o then on
Description
The product experienced an internal system failure.
Recommended action
1. Turn the printer o, then on.
2. If the error persists, reload the rmware. If the error still persists, perform a rmware upgrade.
3. If the rmware upgrade does not resolve the problem, replace the hard disk.
70.XX.YY Error Messages
70.00.00 Error To continue turn o then on
Description
DC controller failure.
Recommended action
1. Turn the printer o, and then on.
2. If the error persists, replace the DC controller.
348 Chapter 2 Solve problems ENWW
To Next Page
Loading...