HP LaserJet Enterprise M552 - Copy Settings menu (M577 only)

Copy Settings menu (M577 only)
To display: At the product control panel, select the Administration menu, and then select the Copy Settings
menu.
In the following table, asterisks (*) indicate the factory default setting.
Table 2-34 Copy Settings menu (M577 only)
First level Second level Third level Values Description
Copies 1–9999
Default = 1
Congure the default
options for copy jobs. If the
user does not specify the
job options when creating
the job, the default options
are used.
Sides 1-sided original, 1-sided
output*
2-sided original, 2-sided
output
1-sided original, 2-sided
output
2-sided original, 1-sided
output
Use to indicate whether the
original document is
printed on one or both
sides, and whether the
copies should be printed on
one or both sides. For
example, select 1-sided
original, 2- sided output
when the original is printed
on one side, but you want
to make two-sided copies.
Orientation Portrait* Specify portrait or
landscape orientation and
select the way the second
sides are printed.
Portrait orientation means
the short edge of the page
is along the top.
Landscape Landscape orientation
means the long edge of the
page is along the top.
ENWW Tools for troubleshooting 201