HP LaserJet Enterprise M552 - Replace Supplies; Resend external accessory firmware; Resend Upgrade; Restore Factory Settings

Replace Supplies
Description
This alert displays only if the printer is congured to stop when a supply reaches the very low threshold. The
printer indicates when a supply level is at its estimated end of life. The actual life remaining might be dierent
than estimated.
The supply does not need to be replaced now unless the print quality is no longer acceptable.
HP recommends that the customer have a replacement supply available to install when print quality is no
longer acceptable.
The printer can be congured to stop when the supply level is very low. The supply might still be able to
produce acceptable print quality.
NOTE: When an HP supply has reached its approximated end of life, the HP Premium Protection Warranty on
that supply ends.
●
10.00.70 : (event code) Black toner cartridge
10.23.70 (event code) Fuser Kit
Recommended action
Replace the specied supply.
Or, congure the printer to continue printing using the Manage Supplies menu on the printer control panel.
Resend external accessory rmware
Description
An external accessory requires a rmware upgrade. Printing can continue, but jams might occur if the job uses
the external accessory.
Recommended action
Perform a rmware upgrade.
Resend Upgrade
Description
A rmware upgrade did not complete successfully.
Recommended action
Upgrade the rmware again.
Restore Factory Settings
Description
The printer is restoring factory settings.
Recommended action
No action necessary.
ENWW Tools for troubleshooting 379