Recommended action
Touch the OK button to clear the error.
Internal disk le system is full
Description
A PJL system command attempted to write data to the internal disk, but failed because the disk is full.
Recommended action
Touch the OK button to clear the error.
Internal disk is write protected
Description
The internal disk is write protected and no new les can be written to it.
Recommended action
Touch the OK button to clear the error.
Internal disk not found
Description
The internal disk was not found at start up.
Recommended action
Turn the printer o, and then on.
Internal disk not functional
Description
82.0X.YY (event code)
The internal hard drive is not functioning properly.
Recommended action
1. Turn o the printer, and then remove and reinstall the hard drive.
2. Turn on the printer.
3. If the error persists, replace the internal hard drive.
Internal disk not initialized
Description
The le system on the internal disk must be initialized before it can be used.
Recommended action
Initialize the le system on the internal disk.
370 Chapter 2 Solve problems ENWW
To Next Page
Loading...