HP LaserJet Enterprise M552 - Page 275

Table 2-44 Embedded Jetdirect Menu (continued)
First level Second level Third level Fourth level Values Description
TCP/IP Enable On*
O
On: Enable the TCP/IP
protocol.
O: Disable the TCP/IP
protocol.
Host Name Use the arrow buttons
to edit the host name.
NPIXXXXXX*
An alphanumeric
string, up to 32
characters, used to
identify the printer.
This name is listed on
the HP Jetdirect
conguration page.
The default host name
is NPIxxxxxx, where
xxxxxx is the last six
digits of the LAN
hardware (MAC)
address.
IPV4 Settings Cong Method Bootp
DHCP*
Auto IP
Manual
Species the method
that TCP/IPv4
parameters will be
congured on the
HP Jetdirect print
server.
Bootp (Bootstrap
Protocol): Use for
automatic
conguration from a
BootP server.
DHCP (Dynamic Host
Conguration
Protocol): Use for
automatic
conguration from a
DHCPv4 server. If
selected and a DHCP
lease exists, the DHCP
Release menu and the
DHCP Renew menu
are available to set
DHCP lease options.
Auto IP: Use for
automatic link-local
IPv4 addressing. An
address in the form
169.254.x.x is
assigned
automatically.
When this option is set
to the Manual setting,
use the Manual
Settings menu to
congure TCP/IPv4
parameters.
ENWW Tools for troubleshooting 247