Table 2-41 Manage Trays menu (continued)
First level Values Description
Alternative Letterhead Mode Disabled*
Enabled
Use this item to load letterhead or preprinted
paper into the tray the same way for all print
jobs (for printing either to one side of the sheet
or to both sides of the sheet). When this option
is selected, load the paper as if printing on both
sides. See the user documentation that came
with the printer for instructions about loading
letterhead for printing on both sides. When this
option is selected, the printer speed slows to
the speed required for printing on both sides.
Duplex Blank Pages Auto*
Yes
Controls how the printer handles two-sided
jobs (duplexing). Two options are available:
Auto: Enables Smart Duplexing, which instructs
the printer not to process blank pages.
Yes: Disables Smart Duplexing and forces the
duplexer to ip the sheet of paper even if it is
printed on only one side. This might be
preferable for certain jobs that use paper types
such as letterhead or prepunched paper.
Override A4/Letter Yes*
No
Prints on letter-size paper when an A4 job is
sent but no A4-size paper is loaded in the
printer (or to print on A4 paper when a letter-
size job is sent but no letter-size paper is
loaded). This option will also override A3 with
ledger-size paper and ledger with A3-size
paper.
ENWW Tools for troubleshooting 245
To Next Page
Loading...