Table 2-4 Pre-boot menu options (4 of 7)
Menu option First level Second level Third level Description
Administrator
(continued)
Congure LAN
NOTE: This
conguration is
only active when
the Pre-boot menu
is open.
IP Mode [DHCP] The network can be congured to obtain the network
settings from a DHCP server or as static.
Use this item for automatic IP address acquisition from
the DHCP server.
IP Mode [STATIC] Use this item to manually assign the network addresses.
IP Address Use this item to manually enter the IP addresses.
Subnet Mask Use this item to manually enter the subnet mask.
Default Gateway Use this item to manually enter the default gateway.
Save Select the Save item to save the manual settings.
Table 2-5 Pre-boot menu options (5 of 7)
Menu option First level Second level Third level Description
Administrator
(continued)
Startup Options Select the Startup Options item to specify options that can
be set for the next time the printer is turned on and
initializes to the Ready state.
Show Revision Not currently functional: Select the Show Revision item to
allow the printer to initialize and show the rmware version
when the printer reaches the Ready state.
Once the printer power is turned on the next time, the
Show Revision item is unchecked so that the rmware
revision is not shown.
Cold Reset Select the Cold Reset item to clear the IP address and all
customer settings. (This item also returns all settings to
factory defaults.)
NOTE: Items in the Service menu are not reset.
Skip Disk Load Select the Skip Disk Load item to disable installed third-
party applications.
Skip Cal Select the Skip Cal item to skip the printer calibration for
the very next power-initialization cycle only.
Lock Service CAUTION: Select the Lock Service item to lock the Service
menu access (both in the Pre-boot menu and the Device
Maintenance menu).
Service personnel must have the administrator remove the
Lock Service setting before they can open the Service
menu.
Skip FSCK Select the Skip FSCK item to disable Chkdisk/ScanVolume
during startup.
94 Chapter 2 Solve problems ENWW
To Next Page
Loading...