Access the print/stop test from a touchscreen control panel
1. From the Home screen on the printer control panel, scroll to and touch the Administration button.
2. Open the following menus:
●
Troubleshooting
●
Diagnostic Tests
●
Print/Stop Test
3. Enter a range, and then touch the OK button.
Access the print/stop test from an LCD control panel
1. From the Home screen on the printer control panel, use the down arrow button to scroll to
Administration, and then press the OK button.
2. Use the down arrow button to scroll to Troubleshooting, and then press the OK button.
3. Use the down arrow button to scroll to Diagnostic Test, and then press the OK button.
4. Use the down arrow button to scroll to Print/Stop Test, and then press the OK button.
ENWW Tools for troubleshooting 155
To Next Page
Loading...